Search

Welcome to JianKe Huifeng Technology Co., Ltd

            Service Hotline : 0316-5175885

Copyright (c) 2019  Beijing Jianke Huifeng Technology Co., Ltd  |    京ICP备:07502180号  |  Powered by www.300.cn

TEL:0316-5175885

E-MAIL:sales@jkhfseal.com

Base:Langfang anci district, 66 day high road

ADD:Tongzhou District, Beijing Zhangjiawan

Development Zone, West Dingfu Zhuang A 51

Right Angle Slip Ring Type Combination Seal JK1-IB

没有此类产品
Details

I.Summary

It is made up of one right angle slip ring made from composite PTFE and one rubber O-ring (GB1235-76). It is used as seal for one-way piston rod (axis) in high or low speed reciprocating motion and high pressure hydraulic system, together with guiding ring and supporting ring. Open groove is recommended when piston rod diameter less than 100 millimeters.

II.Working conditions

Working pressure: 0~60MPa

Working temperature: -55~+250℃(up to the material of O ring)

Reciprocating motion rate: ≤6m/s

Working medium: air, water, Water-glycol, mineral oil, acid, alkali, etc.

III.Assembly diagram

JK1—ⅠB Groove dimensions

轴径
Axis
diameter
d(f8)
沟槽底径
Groove bottom
diameter
D(H9)
沟槽
宽度
Groove
width
b+0.2
O形圈
截面直径
Section
diameter
of O-ring
d2
内圆角
Fillet
R
外圆角
Round
r
径向间隙
Radial clearance
S≤
倒角Chamfer
Z≥
10~22 d+4.5 4.0 2.4 0.2~0.3 0.1~0.3 0.3 2
23~160 d+5.7 4.8 3.1 0.3~0.5 0.3~0.4 3
22~50 d+6.5 5.2 3.5 0.3~0.4 0.3 3
40~290 d+10.4 8.2 5.7 0.3~0.5 0.4 5
155~1000 d+15.2 11.6 8.6 0.4~0.6 0.4 7

 

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Next article