Copyright (c) 2019 Beijing Jianke Huifeng Technology Co., Ltd | 京ICP备13004330号-1 | Powered by www.300.cn
TEL:0316-5175885
E-MAIL:sales@jkhfseal.com
Base:Langfang anci district, 66 day high road
ADD:Tongzhou District, Beijing Zhangjiawan
Development Zone, West Dingfu Zhuang A 51
Right angle slip ring combination seal JK1—ⅠA
1. Overview
The right angle slip ring combination seal JK1—IA consists of a right angle slip ring filled with polytetrafluoroethylene (PTFE) composite material and an O-shaped rubber ring (GB/T3452.1-2005). It is suitable for high and low speed reciprocating motion and one-way piston rod (shaft) sealing of high-pressure hydraulic system. It is used with guide ring and support ring. If the shaft diameter is less than φ100, open grooves should be used if possible.
2. Working conditions
Working pressure: 0~60MPa
Operating temperature: -55~+2500C (depending on O-ring material)
Reciprocating speed: ≤6m/s
Applicable medium: air, water, water-glycol, mineral oil, acid, alkali, etc.
3. Schematic diagram of assembly structure
JK1—ⅠA groove size
Axis diameter d(f8) |
Groove bottom diameter D(H9) |
Groove |
Section diameter of O-ring d2 |
Fillet R |
Round r |
Radial clearance S≤ |
Chamfer Z≥ |
8~17 | d+5.0 | 4.2 | 2.65 | 0.2~0.3 | 0.1~0.3 | 0.2 | 2 |
18~39 | d+6.6 | 5.2 | 3.55 | 0.3~0.5 | 0.3 | 3 | |
40~108 | d+9.6 | 7.8 | 5.30 | 0.4~0.8 | 0.4 | 5 | |
109~900 | d+12.5 | 9.8 | 7.00 | 0.8~1.2 | 0.4 | 7 |